Part 145 repair station requirements, in plain English

The regulation is short. What it asks for is a real shop, real people and a written system that matches both. Here is each requirement, the section it comes from and what the FAA asked us to show for it in 2026.

Updated . Based on 14 CFR part 145 as published in the eCFR and on our own certification.

The short answer

To be certificated under 14 CFR part 145, a shop in the United States needs housing and facilities that fit the work, the tools and current technical data for it, an accountable manager, certificated supervisors, qualified inspectors, a Repair Station Manual and a Quality Control Manual the FAA accepts, a training program the FAA approves, and a list of exactly what it will work on.

All of it has to be in place when the FAA inspects. Plans and purchase orders do not count.

The requirements at a glance

What a U.S. repair station applicant has to have, and where the rule says so
You needIn short14 CFR
An applicationSeven items, from the manuals to a description of the building145.51
Housing and facilitiesSpace, segregation, storage and working conditions that fit your ratings145.101, 145.103
Tools and equipmentOn the premises, under your control, calibrated where they decide airworthiness145.109
Technical dataCurrent and at hand when the work is done145.109
An accountable managerOne employee with authority over everything the station does145.3, 145.151
Supervisors, inspectors and signersEnough of them. In a U.S. station, supervisors and anyone who signs a release hold a part 65 certificate.145.153 to 145.157
RostersWho manages, inspects and signs, with an employment summary for each145.161
A training programApproved by the FAA, with records kept two years145.163
A Repair Station ManualHow the station is organized and run145.207, 145.209
A quality control system and manualHow every article is inspected before it leaves145.211, 145.213
A capability listEach article a limited-rated station may work on145.215
A hazmat training statementIn writing, before the certificate is issued145.53

The application

Section 145.51 lists what an application for a certificate and rating has to include:

  1. A repair station manual acceptable to the FAA.
  2. A quality control manual acceptable to the FAA.
  3. A list, by type, make or model as appropriate, of each article you are applying to work on.
  4. An organizational chart, with the names and titles of managing and supervisory personnel.
  5. A description of the housing and facilities, including the physical address.
  6. A list of the maintenance functions you want to contract out, for the FAA’s approval.
  7. A training program for the FAA’s approval.

The same section says the equipment, personnel, technical data, housing and facilities for the certificate have to be in place for inspection when the FAA approves it. The one exception is equipment you have under a contract the FAA accepts, which makes it available whenever the work is done.

In practice the application arrives in two layers. FAA policy now has your local office check a 14-item readiness package before it puts you in line, and that package already includes the manuals and FAA Form 8310-3. The first form you file is the Preapplication Statement of Intent.

Housing and facilities

The rule does not set a size. It says the housing has to be consistent with your ratings and limitations, and the facilities have to include:

  • Enough work space, and areas to segregate and protect articles while they are worked on.
  • Separate areas for work that could affect other work, such as painting, cleaning, welding, avionics and machining.
  • Racks, stands, trays or other means to store and protect articles in work.
  • Space to keep stocked parts and materials apart from articles being worked on.
  • Ventilation, lighting and control of temperature and humidity good enough for people to do the work to standard.

Work can be done outside your housing when the FAA accepts the alternative and it meets the same tests (145.103). Once certificated, you cannot move, or change the facility in a way that affects the work, without the FAA’s written approval (145.105).

On our inspection day the inspectors toured the shop and checked tools, calibration and how parts were segregated.

Tools, equipment and data

Section 145.109 has four parts.

  • Have it and control it. The equipment, tools and materials for the work have to be on the premises and under your control when the work is done.
  • Calibrate it. Test and inspection equipment used to decide airworthiness has to be calibrated to a standard the FAA accepts.
  • Use the right ones. Tools and equipment have to be those the manufacturer recommends, or at least equivalent and acceptable to the FAA.
  • Keep the data current. Airworthiness directives, instructions for continued airworthiness, maintenance manuals, overhaul manuals, standard practice manuals and service bulletins have to be current and accessible when the work is done.

Our inspectors asked for the calibration log. One of their three findings was a test in our manual that gave a tolerance without citing the standard it came from. Every number in a manual needs a source. The three findings, and what each one taught us.

People

Personnel requirements for a repair station in the United States
RoleWhat the rule requires14 CFR
Accountable managerAn employee you designate, responsible for and with authority over all repair station operations, and the primary contact with the FAA145.3, 145.151
SupervisorsEnough to direct the work. Each holds an appropriate mechanic or repairman certificate under part 65 and oversees anyone unfamiliar with the methods and tools.145.153
InspectorsThoroughly familiar with the regulations and inspection methods, and proficient with the inspection equipment for the article145.155
People who approve work for return to serviceEach holds an appropriate mechanic or repairman certificate under part 65145.157
Everyone else doing maintenanceEnough people with the training, knowledge and experience for the work. You assess the abilities of the ones who hold no certificate.145.151

Supervisors, inspectors and the people who approve work all have to understand, read and write English.

The rule sets no minimum headcount, and in a small shop one person often holds several of these roles. Each role still has to be named, filled and documented.

Repairmen

If you rely on repairmen instead of mechanics, the station recommends each one to the FAA. The recommendation has to say the person is employed by the station and meets the eligibility rules in 14 CFR 65.101 (145.159). A repairman may use the certificate only for the station that employed and recommended them (14 CFR 65.103).

At our inspection the FAA reviewed our repairman applications on site. Each applicant needed a photo ID and sat for a short interview.

Rosters

You keep rosters of management and supervisory personnel, inspection personnel and the people authorized to sign a maintenance release, with an employment summary for each: title, years and type of experience, past employers, scope of present work and certificates held. When someone joins, leaves or changes duties, the roster has to be updated within five business days (145.161).

The training program

A repair station has to have, and use, a training program the FAA has approved. It covers initial and recurrent training and has to make sure every person who performs maintenance or inspection can do the tasks they are assigned. Training records are kept for at least two years (145.163).

Note the wording in the rule. The FAA accepts the two manuals. It approves the training program.

It is easy to treat the training program as a formality. Two of our three inspection findings were about it. Our training forms did not show who had authorized each trainer, and the program did not say how training is delivered. Neither had anything to do with how well anyone was trained. Both were about what the paper said.

The two manuals

The Repair Station Manual describes how the station is organized and run. Section 145.209 lists its contents: an organizational chart with each position’s duties and authority, how the rosters are kept, a description of your housing, equipment and materials, how the capability list and training program are revised, procedures for work away from the station and for air carrier work, how contracted maintenance is controlled, your records system, and how the manual itself is revised and controlled.

The Quality Control Manual describes the inspection system. Section 145.211 calls for procedures covering incoming materials, preliminary inspection, hidden damage, inspector proficiency, current technical data, noncertificated people who do work for you, final inspection and return to service, calibration and its intervals, and corrective action. It also needs sample forms with instructions for completing them.

Both manuals have to be kept current, and the FAA has to be told of each revision. And you have to follow them. That is the part inspectors test: they read a procedure, then ask to see the record it produces.

Before any article is approved for return to service, an inspector who meets the rule has to inspect it. In a U.S. station only a certificated mechanic or repairman can sign off the final inspection and the maintenance release (145.213).

Writing these is the largest single job in a certification. What our manual set includes.

What you will work on

The application lists each article by type, make or model. The certificate then carries ratings that set the limits of your work.

A station with a limited rating may work on an article only if it is on the station’s operations specifications or on a current capability list the FAA accepts. An article goes on that list after a self-evaluation showing you have the housing, facilities, equipment, materials, technical data, processes and trained people for it, and the evaluation stays on file (145.215).

The regulation is blunt about the limit. A repair station may not maintain or alter an article it is not rated for, and may not work on a rated article that needs technical data, equipment or facilities it doesn’t have (145.201).

Hazmat, contractors and air carriers

  • Hazardous materials. Before the FAA issues a certificate to a U.S. station, the applicant has to state in writing that every hazmat employee of the station, its contractors and its subcontractors is trained as 49 CFR part 172, subpart H requires (145.53).
  • Contract maintenance. You may send a maintenance function to an outside source only if the FAA has approved that function for contracting, and you keep a list of who does what. If the outside source holds no certificate, it has to follow a quality system equivalent to yours, you stay directly in charge, and you verify the work by test or inspection before approving it (145.217).
  • Air carrier work. Work for a part 121 or part 135 operator follows that operator’s maintenance program and manual (145.205), requires you to acknowledge the operator’s hazmat notification before you start (145.206), and brings drug and alcohol testing rules under 14 CFR part 120. If you plan to take that work, say so at the start. It changes the manuals.

What the FAA asked for beyond the rule

Part 145 does not mention most of what filled our calendar. These came from the FAA’s process, and each one had a date on it.

  • FAA Form 8400-6 to get in line and FAA Form 8310-3 as the formal application.
  • A business name acknowledgement with our formation documents, before the first meeting.
  • A schedule of events agreed with the certification team.
  • Answers to the FAA’s data collection tools: question sets that check your manuals against the regulation. Each answer had to cite the manual section and page that satisfies the requirement.
  • A compliance cross-reference from each regulation paragraph to the place in our manuals that answers it.
  • On inspection day, every manual, the capability list, the roster and the calibration log, a walk through the facility, and one job walked from work order to maintenance release on our own forms.

The schedule matters as much as the content. Our team gave us 45 days to file the complete package after the preapplication meeting and told us an applicant typically gets three submissions. The whole process, with our dates.

After the certificate

A certificate issued to a station in the United States has no expiry date. It stays in effect until it is surrendered, suspended or revoked (145.55). The obligations continue with it:

  • Maintenance records in English, kept at least two years from the date the article was approved for return to service, with a copy of the maintenance release to the owner or operator (145.219).
  • A report to the FAA within 96 hours of discovering any serious failure, malfunction or defect of an article (145.221).
  • FAA inspection at any time (145.223).
  • Manuals, rosters, capability list and training program kept current, with the FAA notified as your own manual says it will be.

Sources

This page paraphrases the regulation to make it readable. It is not legal advice, and where it differs from the regulation the regulation wins. Requirements for repair stations outside the United States differ in several places and are not covered here.

Tell us about your shop

A few questions about your shop. We read every message ourselves and reply by email. If we look like a fit, you get a written scope and price before any work starts.

Prefer email? hello@stationreadiness.com

For example: limited airframe, class 1 accessory, limited instrument.

Do you have a facility today?

We use what you send only to reply to you. How we handle it.