Part 145 certification questions, answered plainly

What the FAA requires, what it costs, how long it takes, and what we can and can’t do for you.

Getting started

What is a Part 145 repair station certificate?

It is an Air Agency Certificate the FAA issues under 14 CFR part 145. It lets a shop perform maintenance, preventive maintenance and alterations within the ratings on its operations specifications, and approve that work for return to service. What the regulation requires of the shop.

How do I apply for a Part 145 certificate?

You start with a Preapplication Statement of Intent, FAA Form 8400-6, sent to your local Flight Standards District Office with the readiness package the FAA now checks first: your manuals, Form 8310-3 and a proposed schedule of events, among other items. When the office accepts it, you are added to its list of applicants. When your turn comes, the certification team takes you through the preapplication meeting, the formal application, document review and a facility inspection, and then issues the certificate.

Our process page walks through each phase with our own dates, and our guide to Form 8400-6 covers the form box by box.

Do I need a facility before I apply?

You need a real one by the time the FAA picks up your application. The FAA inspects your housing, tools, equipment and data before it issues a certificate, and its current policy lets a certification team treat an application as withdrawn when facilities, equipment or people aren’t in place when they are needed. If you have no shop yet, get in touch once you do.

Cost and time

How long does Part 145 certification take?

There are two waits. The first is the FAA’s queue, and the FAA doesn’t publish a standard time for it. Ours lasted more than a year. The second is the certification itself. Ours took 141 days from the preapplication meeting on June 17, 2026 to the certificate on November 5, 2026, including two returns of our documents.

Your dates will differ. We can’t shorten the queue. We can make sure nothing on your side slows the rest. See where each of our days went.

How much does Part 145 certification cost?

Our fixed fee starts at $25,000, for one location and one limited rating. Each additional rating adds $5,000. It covers the manuals, the application, agent for service and the FAA interface through to the certificate. Your own costs sit outside it: the facility, tooling, calibration, technical data and training. See what is and isn’t included.

The FAA itself charges a U.S. applicant nothing. For what other firms publish, see what Part 145 certification costs.

How does your fee compare with other consultants?

Most firms quote privately, so there are few public numbers. The ones we found: a trade association column in December 2024 put consultant help with a new repair station at $20,000 to $45,000, and the one other done-for-you price list we found starts at $62,500 for a single limited rating. Ours starts at $25,000. Scope differs between all of them. Every published price, with its source.

What does travel cost?

The only travel is the pre-inspection visit to your shop. It is billed at cost with no markup, and capped by region: $1,000 in the Pacific and Mountain time zones, $1,400 in Central and $1,800 in Eastern. Within 150 road miles of Sonoma, California, there is no travel charge. How travel is billed.

Can you guarantee the FAA will certificate my shop?

No, and nobody honestly can. The FAA decides. What we control is the quality and completeness of what the FAA reads, and how fast every question gets answered. If we look at your shop and think the certificate you want is out of reach, we will say so before you pay us.

The work

What do I still have to do myself?

  • Attend the preapplication meeting. The FAA requires the applicant to be there.
  • Tell us how your shop really works, so the manuals describe it.
  • Sign the application, the manuals and the letters.
  • Have the facility, tools, data and trained people in place.
  • Run a job through your own system on inspection day and answer the inspectors’ questions.

What is an agent for service?

Someone you authorize in writing to receive and answer FAA correspondence about your application. Some shops say agent of service. Once you name us, the certification team copies us on everything and we handle the replies. How agent for service works.

What are DCTs?

Data Collection Tools are the question sets the FAA uses in its Safety Assurance System to check your manuals against the regulations. Each answer has to cite the exact section of your manual that meets the requirement. Vague or missing references are a common reason a package comes back.

Our package was already returned. Can you take over?

Usually, yes. Send us the return letter and the marked-up documents. We will tell you what it will take, and whether there is enough room left on the FAA’s schedule to do it properly.

Can I hire you for the manuals only?

Yes. Some shops want to handle the FAA themselves and need a manual set that will stand up to review. Others are already certificated and need revisions. Tell us which and we will price that piece.

About us

You have done one certification. Why would I hire you?

Because we did it under the rules in force now, and we did the work ourselves. Our station was certificated on November 5, 2026 through the FAA’s current system: the national queue, the online preapplication meeting, the 45-day filing deadline, the limit on submissions. We wrote the answers and took the returns.

If you want a firm of former FAA inspectors with a long client list, those exist and some are very good. If you want the applicant’s side of the job done for a flat fee by people who just finished it, that is us.

Are you former FAA inspectors?

No. We are applicants who took our own repair station through the FAA’s current process in 2026 and did the paperwork ourselves. Some consultancies are staffed by former FAA inspectors, and for a large or unusual certification that background can be worth paying for. For a small shop applying for one or two limited ratings, we think a complete application and fast answers matter more. How to choose a Part 145 consultant.

My shop does different work from yours. Does that matter?

The process, the portals, the deadlines and the structure of the manuals are the same for every Part 145 applicant. The technical content is yours: your ratings, capability list, tooling and data. We build the manuals around that with you. If your scope calls for knowledge we don’t have, we will tell you at the start.

Did you get your own certificate without help?

No. We had an experienced consultant in our corner as our agent for service, and we would recommend having one. The hours were still ours: rebuilding and revising the manuals, answering the FAA’s questions, uploading the packages and fixing what came back. That is the part we now do for other shops.

Are you part of the FAA?

No. Station Readiness is an independent business. We are not the FAA, we are not affiliated with it or endorsed by it, and we can’t issue or approve anything. Only the FAA issues repair station certificates.

Where do you work?

We are based in Sonoma, California and work remotely with shops across the United States. If your station is outside the U.S., ask us first. Foreign repair stations follow a different path and we would quote that separately.

Ask us something that isn’t here

A few questions about your shop. We read every message ourselves and reply by email. If we look like a fit, you get a written scope and price before any work starts.

Prefer email? hello@stationreadiness.com

For example: limited airframe, class 1 accessory, limited instrument.

Do you have a facility today?

We use what you send only to reply to you. How we handle it.