What does Part 145 certification cost?

The FAA does not charge a U.S. shop to apply. The cost is everything it takes to be ready: the paperwork, the shop and the wait. These are the prices we could find in print, with sources, and the costs nobody quotes.

Updated . Prices checked against their sources on November 18, 2026.

The short answer

For a shop in the United States the FAA’s own fee is zero. Published prices for outside help on a small, single-rating station run from $8,000 for a compiled manual set you finish yourself to $62,500 for a done-for-you package, and past $100,000 for bigger scopes. Our fixed fee starts at $25,000.

Your own costs sit on top of any of those: the building, tools, calibration, technical data and training. They depend on what you already have.

What the FAA charges

Nothing, for a repair station in the United States. The FAA’s schedule of certification fees (14 CFR part 187, appendix A) applies to services performed outside the United States. That is why a foreign repair station pays the FAA and a domestic one does not.

So every dollar in a domestic certification goes to something other than the FAA: the people who write and file the paperwork, and the shop itself.

The published prices

Most firms in this field quote privately. These are the figures we found in print. Each one is linked under Sources so you can read it where it was published.

  • Compiled manual set from a law firm (2021)$8,000 to $17,500
  • Consultant, basic avionics certificate, trade magazine (2022)$12,000 to $20,000
  • Consultant help, suppliers association column (2024)$20,000 to $45,000
  • Station Readiness, one limited rating (2026)from $25,000
  • Delta Bravo Aviation, small-shop tier (2026)$62,500
  • Delta Bravo Aviation, core package (2026)$75,000 to $120,000
Published prices for Part 145 certification help
Published byWhat the price coversPriceDate
Obadal, Filler, MacLeod & Klein, a law firm, with rates for Aeronautical Repair Station Association membersA compiled set of repair station, quality, forms and training manuals with templates and a few hours of support. You customize it and run the certification yourself.$8,000 to $10,000. With customization sessions, $12,500 to $17,500. The lower figure in each pair is the member rate.January 2021
Avionics News, the magazine of the Aircraft Electronics AssociationA consultant’s time on a basic certificate for altimeter and transponder checks: about 80 hours, priced by the hourly rate.$12,000 to $20,000October 2022
Aviation Suppliers Association columnConsultant help with a new U.S. repair station, depending on how much you need.$20,000 to $45,000December 2024
Station Readiness (us)Done for you: one location, one limited rating, a capability list of up to 25 items, a pre-inspection at your shop and 12 months of waiting.From $25,000. Each additional rating $5,000.Current
Delta Bravo Aviation, small-shop tierDone for you, delivered remotely: one location, one limited rating (avionics, instrument, pitot-static or limited repair), a capability list of up to 25 part numbers and six months of waiting.$62,500Checked November 18, 2026
Delta Bravo Aviation, core packageDone for you, delivered remotely: one location, up to three limited ratings, a capability list of up to 50 part numbers and six months of waiting.$75,000 to $120,000, typically $89,500Checked November 18, 2026

These are other people’s prices as they published them. They can change without notice, and each package includes things the others do not. Read the source before you compare.

Three things stand out. The oldest figures are the lowest, and they predate the FAA’s readiness checks and deadlines. The spread is more than tenfold. And the cheapest option is a different product: a manual set is the start of a certification, and the applicant does the rest.

Why the prices differ

Scope. Before you compare two quotes, line them up on these points.

  • How many ratings. Each rating adds procedures, capability list entries and review. One published list charges $6,500 for each rating past its third. We charge $5,000 for each one past the first.
  • How long a capability list. Every article on it needs a self-evaluation showing you have the data, tools and people for it.
  • Who your customers are. Work for air carriers adds procedures to the manual and brings drug and alcohol testing rules (14 CFR part 120). Most price lists treat it as an add-on. So do we.
  • Manuals only, or the whole certification. Writing the manuals is one job. Filing them, answering the FAA’s question sets and revising after each return is another.
  • Who answers the FAA. Some firms draft replies for you to send. Others act as your agent for service and answer directly.
  • Remote or on site. A visit to your shop before the FAA’s inspection is included in some fees and priced separately in others.
  • How much waiting is covered. The queue can outlast the engagement. Ask how many months are included and what each extra month costs.
  • What happens after a return. Revisions can be included, capped or billed by the hour.

Our guide to choosing a Part 145 consultant turns these into ten questions you can send to any firm.

What your shop pays for itself

No consultant’s fee covers these, ours included. The regulation requires each one to be in place when the FAA inspects.

  • Housing and facilities that fit the work you are applying for, with segregated areas and storage (14 CFR 145.103).
  • Tools and equipment on the premises and under your control. The regulation calls for the ones the manufacturer recommends, or equivalents the FAA accepts (145.109).
  • Calibration of test and inspection equipment to a standard the FAA accepts, with records.
  • Current technical data: maintenance and overhaul manuals, instructions for continued airworthiness, service bulletins and airworthiness directives for everything on your capability list.
  • Certificated people. In a U.S. station, supervisors and anyone who approves work for return to service need a mechanic or repairman certificate (145.153 and 145.157).
  • Training under a program the FAA has approved, with records, and hazardous materials training for anyone who handles hazmat.
  • Your own hours. You attend the meetings, explain how your shop works, sign, and run a job for the inspectors.

We haven’t put dollar figures on this list because we would be guessing. A shop that already does the work under a mechanic’s certificate may own nearly all of it. A new shop is buying all of it. What the regulation requires, section by section.

What the wait costs

The queue is usually the largest cost and it never appears in a quote. We waited more than a year between filing and the FAA’s first notice. A 2023 article in MRO Management put the wait for the FAA to assign people at up to 15 months.

During that time you are paying rent and keeping people and tooling ready for work you can’t yet sign for as a repair station. If your business plan depends on the certificate, plan the cash for the wait first. How long each stage took us.

Doing it yourself

It is allowed, and it costs nothing in fees. We did the hours on our own certification, with an experienced consultant in our corner as agent for service.

What it costs is time and risk. Our first revision ran to 34 PDFs. Each of two returns had to go back complete, and the FAA’s certification team told us an applicant typically gets three submissions. FAA policy gives an applicant 15 calendar days to answer a corrective action letter, and an application that stalls can be treated as withdrawn. A withdrawn applicant has to reapply, starting with the preapplication package.

If you have the time and the temperament for regulatory writing, a compiled manual set is the cheapest way in. If you are running a shop full time, price your evenings honestly before you choose.

Ways to spend less

  • Apply for one rating first. You can add a rating later by applying for a change to the certificate (145.57). We applied for two limited ratings and dropped one during review so it would not hold up the other.
  • Start with a short capability list. A station with a limited rating can add articles later through a documented self-evaluation (145.215).
  • Use the queue. Manuals written while you wait cost the same as manuals written in a rush, and they leave room to fix what the FAA finds.
  • Get every quote in writing with its scope. A low price for manuals only is not a low price for a certification.
  • Look at buying a station. Trade press lists buying an existing repair station, or operating as a satellite of one, as ways to avoid starting cold. Neither skips the FAA. A new owner still has to apply for an amended or new certificate (145.57), and a satellite has to be under the managerial control of the station it belongs to (145.107).

How our fee is built

$25,000 covers the base case: one location, one limited rating, a capability list of up to 25 items, in the United States, with no air carrier customers. It includes agent for service, the full manual set, the application, the FAA’s question sets, revisions through every return, a pre-inspection at your shop and 12 months of keeping the application active.

Each additional rating is $5,000. Anything larger gets a written quote before work starts. Travel for the pre-inspection is billed at cost and capped. The full list of what is and isn’t included.

We are at the low end of the done-for-you prices in print for a reason we would rather state than hide. We are a small team with one certification behind us, our own, and we are not former FAA inspectors. If your scope needs a bench of specialists, a higher fee elsewhere may be money well spent.

Sources

We are one of the firms on this page, so check our arithmetic. If a price here is out of date, tell us at hello@stationreadiness.com and we will correct it.

Tell us about your shop

A few questions about your shop. We read every message ourselves and reply by email. If we look like a fit, you get a written scope and price before any work starts.

Prefer email? hello@stationreadiness.com

For example: limited airframe, class 1 accessory, limited instrument.

Do you have a facility today?

We use what you send only to reply to you. How we handle it.