How to choose a Part 145 consultant

We are one, so read this with that in mind. We have tried to write the page we wanted when we were the applicant: what kinds of help exist, what they cost in print, what to ask, and when a firm other than ours is the better choice.

Updated . Prices checked against their sources on November 18, 2026.

The short answer

Decide first what you want off your desk: the manuals, or the whole certification. Then send every firm the same ten questions and compare the answers in writing. A price means nothing until you know how many ratings it covers, who answers the FAA and what happens after a return.

Do you need one at all?

No rule says you do. The FAA deals with the applicant, and an owner can write the manuals, file the application and answer the FAA without help.

We had help. An experienced consultant acted as our agent for service, and we would recommend having one. The hours were still ours: rebuilding the manuals through two returns, answering the FAA’s question sets and uploading every package.

Doing it alone makes sense if you have the time, you are applying for one simple rating, and you are comfortable reading regulations and writing procedures. It makes less sense if the shop already takes all your hours. The FAA now runs certifications against deadlines, and an application that stalls can be treated as withdrawn. How those deadlines work.

Four kinds of help

Firms that all call themselves Part 145 consultants sell very different things.

What each kind of help does, and what stays with you
Kind of helpWhat you getWhat you still doPrices in print
Compiled manual setsA manual set built from a tested structure, with templates and some coachingTailor it to your shop, file it, answer the FAA and revise after returns$8,000 to $17,500 from one law firm’s 2021 rate sheet
Manual writersManuals written for your shopThe application, the FAA’s question sets and the correspondence, unless you add themUsually quoted
Advisory firms, often former FAA inspectorsGuidance from people who have reviewed applications from the FAA’s sideVaries. Some draft replies for you to sign and send.Usually quoted. A trade association column in 2024 put consultant help at $20,000 to $45,000.
Done-for-you certificationThe firm writes, files and answers, from the first form to the certificateAttend the meetings, explain your shop, sign, and get the facility readyFrom $25,000 (ours) to $62,500 and up (the one other list we found)

None of these is the right answer for everyone. A shop with a strong quality person on staff may only need a manual set. A shop applying for several class ratings needs depth we don’t have. The sources for every figure are in our guide to what Part 145 certification costs.

Ten questions to ask

Send the same list to every firm, ours included, and ask for the answers in writing.

  1. Who will write my manuals, and have they taken a station through the FAA’s current process? The FAA added a readiness check in 2024 and stricter 15-day response deadlines in 2025. Experience from before those changes is worth less than it sounds.
  2. Is the price fixed, and what would change it? Ask for the list of things that cost extra.
  3. How many ratings and how many capability list items does it cover? This is where two quotes that look alike turn out to be for different jobs.
  4. How many months of waiting are included? The FAA’s queue can outlast the engagement. Ask what each month after that costs.
  5. Who answers the FAA? Some firms act as your agent for service and reply directly. Others draft for your signature. Either can work. You should know which you are buying.
  6. Are revisions after an FAA return included, and how fast do you turn them? Ours went back in 11 days, twice. The speed of each revision is the part of the calendar an applicant controls.
  7. Will you come to my shop before the FAA does? If so, ask what the day costs and how travel is billed.
  8. When do I pay, and which payments depend on the FAA? Payments tied to FAA events can sit for a year through no fault of yours or the firm’s.
  9. What happens if the application is withdrawn or denied, or I have to stop? Read the contract before you pay anything. If a firm won’t send it, that is your answer.
  10. Can I see a certification you did? A reference, a redacted return letter, a timeline. Something that shows the work.

Our own answers are on this site. The price and what changes it are on the pricing page. The dates of our certification are on the process page. To question ten, the honest answer is that our one certification is our own.

Warning signs

  • A promise that the FAA will issue the certificate, or a date for it. The FAA decides both.
  • A claim to be approved or endorsed by the FAA as a consultant. We know of no such approval. Ask to see it.
  • A manual that could belong to any shop. The FAA holds you to every sentence in it, so a procedure you don’t follow is a finding waiting to happen.
  • No clear answer on who handles a return, or what it costs.
  • The whole fee due before any work is delivered.
  • Pressure to apply for more ratings than you can show on inspection day.

When we are the wrong choice

We would rather lose the job than take one we can’t do well. Look elsewhere if:

  • You want former FAA inspectors on your side of the table. We are not. We were the applicant.
  • You are applying for class ratings on large aircraft or turbine engines, or building a station around air carrier heavy maintenance.
  • Your station is outside the United States, or you need EASA or another authority’s approval alongside the FAA’s.
  • You want a firm with a long list of past clients to call. We have one certification behind us.

Firms that do those things exist, and some are very good. Ask them the same ten questions.

When we fit

  • A shop in the United States applying for one or two limited ratings
  • An owner who wants a fixed price in writing before any work starts
  • An owner who wants the FAA’s email answered by someone else, on time
  • A shop whose package was returned and needs it rebuilt against the clock

What we bring is narrow and recent. We took our own station through the national queue, the online preapplication meeting, the 45-day filing window and two document returns in 2026, and were certificated on November 5. More about us.

Sources

We compete with some of the firms this page describes. We have named prices only where their owners published them, and we have linked each one so you can check it.

Tell us about your shop

A few questions about your shop. We read every message ourselves and reply by email. If we look like a fit, you get a written scope and price before any work starts.

Prefer email? hello@stationreadiness.com

For example: limited airframe, class 1 accessory, limited instrument.

Do you have a facility today?

We use what you send only to reply to you. How we handle it.